1600℃ Tube Furnace
H-1600MT tube furnace
H-1600MT horizontal tube furnace adopt a 40,60, 70, 80 or 100mm O.D quartz tube and a pair of stainless steel vacuum sealing flanges with needle valves & gauge allow heating samples under vacuum or gas flow conditions. The temperature of this tube furnace is controlled by a high precision digital controller which provides 51 programmable segments with +/- 1℃ accuracy. The max. working temperature is 1600℃ .
Specifications
|
Ⅰ. Technical Specifications |
|
|
Max. temperature |
1600 ℃ (<2 hours) |
|
Working temperature |
700-1500 ℃ |
|
Standard Temperature controlling |
● PID automatic control via SCR (Silicon Controlled Rectifier)power control with phase angle fired, current limiting resistor. ● 51 programmable segments for precise control of heating rate, cooling rate and dwell time. ● Built in PID Auto-Tune function with overheating & broken therm℃ouple broken protection.
● Over temperature protection and alarm allows for operation without attendant.
|
|
Optional of Temperature controlling |
● Software (Furnace can be operated by PC by installing a control software ) ● Touch screen temperature controller |
|
Temperature accuracy |
±1℃ |
|
Heating rate |
Heating rate<15 ℃/min |
|
Thermocouple |
B type (Pt-Rh) with 99.7% purity Alumina tube |
|
Heating element |
U type MoSi2 heating element |
|
Furnace Chamber |
There layers of ceramic fiber insulation materials ● First layer: 1800℃ ceramic fiber board. ● Second layer: 1600℃ ceramic fiber board. ● Third layer: 1260℃ ceramic fiber board. |
|
Furnace structure |
Double layer steel casing with dual cooling fan, surface temperature below 60 ℃. |
|
Vacuum system |
● Double stage rotary vane vacuum pump with magnetic valve to prevent the oil absorbed to tube. ● Self-expansion type double silicon ring flange, 304 stainless steel HCP. ● Needle valve + Mechanical vacuum gauge + Discharge valve |
|
Warranty |
● One year limited warranty with lifetime support. (Consumable parts such as heating elements and crucibles are not covered by the warranty, please order the replacement at related products) ● ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty. |
|
Certifications |
|
|
Ⅱ. Application Notes |
|
|
Using Attentions |
● Cooling rate shall also not exceed 5 ℃ /min. ● Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision. ● Small cracks may appear on the surface of the refractory ceramics over extended use. ● The tube furnace is avoid use vacuum above 1500 ℃, otherwise the tube will be serious deformation. |
Standard Size
|
Type |
Max.Temperature (℃) |
Furnace Chamber Size (mm) (Diameter*Heating zone) |
Constant temperature zone(mm) |
Rated Power (kw) |
|
|
H-16MT-40/300 |
1600 |
40 |
300 |
100 |
3 |
|
H-16MT-60/300 |
1600 |
60 |
300 |
100 |
4 |
|
H-16MT-80/300 |
1600 |
80 |
300 |
100 |
5 |
|
H-16MT-100/300 |
1600 |
100 |
300 |
100 |
8 |
|
H-16MT-120/300 |
1600 |
120 |
300 |
100 |
10 |
|
H-16MT-40/450 |
1600 |
40 |
450 |
150 |
5 |
|
H-16MT-60/450 |
1600 |
60 |
450 |
150 |
7 |
|
H-16MT-80/450 |
1600 |
80 |
450 |
150 |
8 |
|
H-16MT-100/450 |
1600 |
100 |
450 |
150 |
10 |
|
H-16MT-120/450 |
1600 |
120 |
450 |
150 |
12 |
|
Note |
Special size is customizable. |
||||