Push Plate Furnace with double tunnels
Push Plate Furnace with double tunnels
Application
Application: Special ceramic, structural ceramic, electronic ceramic, function ceramic, magnetic material, electronic powder, electronic device.
Description
1. The double tunnels are horizontal distribution, and the products in two tunnels are moving in opposite direction. The waste heat in one tunnel can preheat the products in another tunnel, thus the waste heat can be sufficient used, and the energy can be saved 25-45% than single tunnel.
2. The push plate are circulated automatically, and controlled by PLC.
3. The double tunnels furnace has features of low investment, high capacity, high temperature uniformity etc, which is the most popular furnace in domestic and abroad.
Main specification data
|
Furnace name |
High temperature Reverse Push Plate Furnace with double tunnels |
|
Type |
TL-75-16 |
|
Chamber size |
7500 x 150 x 150mm(L x W x H) x double tunnels ( the height is without the plate's height) |
|
Push plate size |
120 x 120 x50mm (L x W x H) |
|
Furnace size |
About 1200 x 2000 x 1700mm (L x W x H) |
|
Loading Height |
≤150mm |
Basic data
| Max. Temperature |
1700℃(≤2 hours) |
Working Temperature |
1650℃ |
|
Rate Power |
75KW |
||
|
Rate Voltage |
380V, 3 phase, 50HZ |
||
|
Temperature accuracy |
±1℃ |
||
|
Temperature fluctuation |
±5℃(2 hours after the constant temperature) |
||
|
Furnace shell temperature |
≤50℃, far away from the temperature testing point and the distance of heating element≥100mm |
||
Temperature Zones, Heating Element, Temperature points distributions
| High Temperature Zone |
Zone No. |
1, 2 |
||
|
Rate Temperature |
1600 |
|||
|
Zone Length |
810 |
|||
|
Pre-heating Zone and Cooling Zone |
3345mm |
|||
|
Zones Nos. |
2 |
|||
|
Heating element |
Two Zones MoSi2 heating Element |
|||
|
Heating Mode |
Tow sides of the chamber and middle |
|||
|
Temperature Point |
2 ( by furnace top) |
|||
|
Transformer |
2 pecs |
|||
|
Thermocouple |
B type, 2 pecs |
|||
|
Propeller |
Hydraulic pressure |
|||
Total set furnace
| 1 |
Furnace body |
1 set |
|
2 |
Propeller |
2 sets |
|
3 |
Control system( including thermocouple, extension wire, transformer) |
1 set |
|
4 |
Push Plate |
120 pecs |
|
5 |
MoSi2 Heating element (including 2 spare parts |
20 pecs |